Turbosmart BLOW OFF VALVES - Plumb Black – Universal Instrukcja Użytkownika Pobierz pdf (Strona 2)

Turbosmart recommends that the following maintenance procedure is carried out at six monthly intervals. Regular maintenance will

ensure that your BOV is operating at its peak and will extend the working life of the product.

• Remove the cap of the BOV by rotating in an anti-clockwise direction (see figure 1) – CAUTION,

the cap is under spring

tension, wear safety glasses and remove with care!

• Remove the piston, thoroughly clean the piston and the bore of the BOV

• Inspect the surface of the piston and the bore of the BOV for scoring or excessive wear, silver coloured marks are an

indication of excessive wear

• Check the Base O-ring and the Cap O-ring for any damage – replace if necessary

• Lubricate the bore and the piston with Uni-Glide™, hydraulic oil or sewing machine oil (see figure 1) – DO NOT use grease or

viscous oils

• Re-assemble the BOV in the reverse order

----------------------------------------------------------------------------------------------------------------------

TROUBLE SHOOTING

The following points should be checked if you find that your engine is dipping below normal idle, stalling or if the BOV is functioning

poorly. Please note, the following checks will cure 99% of problems experienced with a BOV.

• Check the vacuum hose for splits, cracks, loose connection, kinking or any obstruction – old or fatigued hose may collapse under

vacuum causing an obstruction

• With the engine running remove the vacuum / pressure hose from the nipple in the cap of the BOV, there should a loud hissing

sound. The engine should idle poorly, double check by covering the end of the hose with your finger. If this does not occur, the

hose could be blocked or crimped. Check the hose and replace if necessary.

• Ensure that the vacuum / pressure source is not shared and that the vacuum source is directly from the inlet manifold

• Check the seal between the adapter and the BOV – ensure that there is no gap between the BOV base and the weld flange

• Check the join between the adapter and the intercooler pipe for leaking

DO NOT USE ANY TURBOSMART PRODUCT UNTIL YOU HAVE CAREFULLY READ

AND UNDERSTOOD THE FOLLOWING AGREEMENT.

Please call if you have any questions or do not understand this agreement. Refer to our brochure, website or catalogue for terms and conditions and further information

regarding your product. Turbosmart appreciates your business and pride ourselves on our customer service. We are always happy to offer you advice and will provide you

with help in any way we can. The purpose of this agreement is to avoid any problems or hard feelings.

We sometimes make mistakes, as do our dealers, distributors and suppliers. Even customers can sometimes order the wrong parts. Do not use, modify, install, trial

assemble, nick, drop, scratch or adjust any part until you first check for any damage. Damage must be reported immediately. NO EXCEPTIONS. If there are any

components missing please contact your authorised reseller immediately upon receipt of your shipment. Missing components must be reported within five (5) business

days of receipt. Parts returned for any reason MUST BE IN RESALABLE CONDITION. It is YOUR responsibility, “THE CUSTOMER” to carefully package any returns to

avoid shipping damage. Insurance is highly recommended. Credit cannot be issued for damaged goods.

Turbosmart Pty Ltd warranties the quality of the products it designs and manufactures to be free of defects in material and workmanship. This limited warranty is extended

only to the original purchaser and may not be transferred or assigned. This limited warranty applies to any product, which after careful inspection by Turbosmart Pty Ltd,

after receipt of the product from our authorised reseller, is found to have a defect in either material or workmanship. Any modifications to the product will void any and all

warranties and will not be exchanged. Before installation, check new car warranty. Turbosmart Pty Ltd is not responsible for voiding any original manufactures warranty.

All warranty claims must be returned to the authorised reseller, you must return the product and sales receipt, at your own expense, accompanied by a letter stating the

reason for the claim. Proof of purchase must be provided with any warranty claim and will be verified with the authorised reseller from which the product was purchased.

If all the above procedures are followed, and the product is found to be defective in either workmanship or material, Turbosmart Pty Ltd shall either repair or replace the

product, at its sole discretion, and sole cost. This limited warranty does not cover or apply to any personal injury, labour charges or any other incidental costs or damages

caused by the defective product. The individual purchaser acknowledges and agrees that the disclaimer of any liability for personal injury is a material term for this

agreement and the individual purchaser agrees to indemnify Turbosmart Pty Ltd and to hold Turbosmart Pty Ltd harmless for any claim related to the item of the

equipment purchased. Under no circumstances will Turbosmart Pty Ltd be liable for any damages or expenses by reason of use or sale of any such equipment.

THIS LIMITED WARRANTY IS THE ONLY EXPRESS WARRANTY, WHICH APPLIES TO TURBOSMART PTY LTD PRODUCT AS EXPRESSLY GIVEN IN LIEU OF

ANY OTHER WARRANTY EXPRESSED OR IMPLIED, INCLUDING THAT OF MERCHANTABILITY. ANY IMPLIED WARRANTY INCLUDING THAT OF

MERCHANTABILITY AND/OR FITNESS FOR A PARTICCULAR PURPOSE IS HEREBY LIMITED BY THE SAME TERMS AND TIME LIMITATIONS SET FORTH IN

THIS LIMITED EXPRESS WARRANTY AND OTHERWISE EXCLUDED.

EXCEPT FOR THOSE OBLIGATIONS ASSUMED HEREIN, TURBOSMART PTY LTD ASSUMES NO OTHER OBLIGATIONS IN CONNECTION WITH THE SALE OF

ITS PRODUCTS.

IN THE EVENT THAT THE INDIVIUDAL PURCHASER DOES NOT AGREE WITH THIS AGREEMENT THE BUYER MAY PROMPTLY RETURN THIS PRODUCT, IN A

NEW AND UN-USED CONDITION, WITH A DATED PROOF OF PURCHASE, TO THE PLACE OF PURCHASE WITHIN SIXTY (60) DAYS FROM THE DATE OF

PURCHASE FOR A FULL REFUND.

THE INSTALLATION OF THIS PRODUCT INDICATES THAT THE INDIVIDUAL PURCHASER HAS READ AND UNDERSTOOD THIS AGREEMENT AND ACCEPTS

ITS TERMS AND CONDITIONS.

Happy motoring!

The Turbosmart Team

Turbosmart Pty Limited P.O.Box 264 Croydon, NSW, 2132 Australia ABN: 69 081 069 794

Tel: +(612) 9740 2866 Fax: +(612) 9798 2826 Email: [email protected]

www.turbosmart.com.au www.turbosmartusa.com www.turbosmart.co.nz

1 2

TROUBLE SHOOTING 2

Komentarze do niniejszej Instrukcji

Brak uwag

Turbosmart BLOW OFF VALVES - Plumb Black – Universal Instrukcja Użytkownika Strona 2

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Do samochodu Turbosmart BLOW OFF VALVES - Plumb Black – Universal